OCXPH forums > Hardware > RAM/Memory > DDR2 > G.Skill DDR2-1100 2x2GB F2-8800CL5D-4GBPI
Pages: [1]
« previous next »
  Print  
Author Topic: G.Skill DDR2-1100 2x2GB F2-8800CL5D-4GBPI  (Read 643 times)
xzulu
Administrator
Senior Member
*****
Posts: 729

OCXPH Founder


WWW
« on: December 08, 2009, 06:47:01 AM »
Quote
G.Skill DDR2-1100 2x2GB F2-8800CL5D-4GBPI
-4GB (2 x 2GB)
-DDR2 1100
-Timings 5-5-5-15
-1.8.-1.9v Rating



Another great kit by G.Skill. I've been using this kit before I was able to get my hands on the G.Skill DDR2-1200 kit. This kit also run warm jut like the 1200 kit, but never hot. I use this also on my Q9650/Gigabyte UD3R build. Yes, very stable!

DDR2-1125 at 1.92v (idle) 1.9v (load)


DDR2-1133 at 1.92v (idle) 1.9v (load) This was for everyday use.


Specs:
Intel Core 2 Quad Q9650
Gigabyte EP45-UD3R Rev.1.1
G.Skill DDR2-1100 2x2GB
Logged




danding
Newbie
*
Posts: 23
« Reply #1 on: December 30, 2009, 03:42:46 AM »
sir dito na ako tanong kung ok lang.

i'm planning to upgrade to this memory. ok kaya??? my current memory is geil 2x2gb ddr2-800



my pc spec
e8400
maximus ii gene
gtx275
« Last Edit: December 30, 2009, 03:47:06 AM by danding » Logged
xzulu
Administrator
Senior Member
*****
Posts: 729

OCXPH Founder


WWW
« Reply #2 on: December 30, 2009, 07:01:00 AM »
Hi danding! Welcome to the thread.

I suggest getting something better than what you have. I saw your post on the Intel thread that you plan to OC the E8400.
If so you need ram that can be overclocked and/or be stable at overclocking.

That kit you posted is also good. That's the new one, with new heat spreaders, but basically they probably used the same IC's as the one's I've used in the past.
Go ahead and get them! Smiley
Logged




danding
Newbie
*
Posts: 23
« Reply #3 on: December 30, 2009, 07:50:46 AM »
wow thanks very much for you help "again" hehehehe.

i'll just use the geil memory for my internet pc.......

Logged
xzulu
Administrator
Senior Member
*****
Posts: 729

OCXPH Founder


WWW
« Reply #4 on: December 30, 2009, 08:14:01 AM »
Welcome bro!
Logged




olivervista
Newbie
*
Posts: 22
« Reply #5 on: January 04, 2010, 02:19:26 AM »
i like this!



wafuuuuu!   Shocked Shocked Shocked
Logged
CPU: E7400 at 3.8GHz
Mobo: Asus P5Q P45
HSF: Zalman 9700NT, Thermalright HR-03 GT
RAM: Xtreem Dark 2x2 gb DDR2 800 at 380 MHz
VC: Palit 9800GT Sonic
Fan/s: 2 x Silverstone FM121; 1 x Zalman 80 mm
Case: iCute S901
PSU: HEC Win+Power 550AB
Display: Samsung 2233SW
Audio:  Altec Lansing VS4121
xzulu
Administrator
Senior Member
*****
Posts: 729

OCXPH Founder


WWW
« Reply #6 on: January 06, 2010, 03:29:57 AM »
Yup. I the IC's of this kit and also the 1200 PI kit are better than the one's on the trident.
Logged




Woody
Global Moderator / OCXPH OC Team
Senior Member
*****
Posts: 895
« Reply #7 on: January 23, 2010, 08:06:08 AM »
Benchmarked...:




* Images are hosted courtesy of OC[W] (OC Workbench, where I also write) so you may need to be logged in there to see them here... Undecided


DDR2-1200 is easy... Cheesy
Logged




Ire fortiter quo nemo ante iit…
[W]
xzulu
Administrator
Senior Member
*****
Posts: 729

OCXPH Founder


WWW
« Reply #8 on: January 23, 2010, 04:33:44 PM »
Quote from: Woody on January 23, 2010, 08:06:08 AM
Benchmarked...:




* Images are hosted courtesy of OC[W] (OC Workbench, where I also write) so you may need to be logged in there to see them here... Undecided


DDR2-1200 is easy... Cheesy


@Woody,

At what voltages (vdimm/vMCH) did they need to run it at 1200?
Logged




Woody
Global Moderator / OCXPH OC Team
Senior Member
*****
Posts: 895
« Reply #9 on: January 23, 2010, 04:44:22 PM »
Quote from: xzulu on January 23, 2010, 04:33:44 PM
Quote from: Woody on January 23, 2010, 08:06:08 AM

@Woody,

At what voltages (vdimm/vMCH) did they need to run it at 1200?

@X

Vdimm = 2.2V (BIOS)

Other (chipset related) settings were at default...

HTH.
Logged




Ire fortiter quo nemo ante iit…
[W]
xzulu
Administrator
Senior Member
*****
Posts: 729

OCXPH Founder


WWW
« Reply #10 on: January 23, 2010, 05:26:29 PM »
Quote from: Woody on January 23, 2010, 04:44:22 PM
Quote from: xzulu on January 23, 2010, 04:33:44 PM
Quote from: Woody on January 23, 2010, 08:06:08 AM

@Woody,

At what voltages (vdimm/vMCH) did they need to run it at 1200?

@X

Vdimm = 2.2V (BIOS)

Other (chipset related) settings were at default...

HTH.

Ouch! This kit is rated to run 1.9v. LOL!
Logged




Pages: [1]
  Print  
« previous next »
 
Jump to:  

Valid XHTML 1.0! Powered by SMF 1.1.10 | SMF © 2006-2009, Simple Machines LLC
Sis: deruni 		Valid CSS!